FL07SA-152 — XL Roll Flange 1040×1000 mm, No-Plug 6" No Flaps
Made to order — typically 15–17 working days
Dispatch ex-works · transit not included
FL07SA-152 — XL Roll Flange 1040×1000 mm, No-Plug 6" No Flaps is backordered and will ship as soon as it is back in stock.
1 pack = 30 pcs · need more than 10 packs? Request a quote
Pickup available at ROLL SNC
Usually ready in 2-4 days
Delivery and Shipping
Delivery and Shipping
Dispatch. Each product page shows its lead time: in-stock items ship in 5–7 working days; made-to-order items typically in 15–17 working days; built-to-order items typically in 8 weeks. Lead times refer to dispatch from our warehouse (ex-works Bernate Ticino, Italy), not to delivery.
Transit. Orders travel by groupage road freight on pallets. Transit time depends on destination and is not included in the lead time — groupage delivery may add several working days. Shipping cost is calculated at checkout based on destination country and number of pallets.
Pickup. Free ex-works pickup at our warehouse (Bernate Ticino, MI, Italy) is always available at checkout.
Not covered? If your country is not covered at checkout, or you need a different quantity or delivery arrangement, use Request a quote and we will come back with exact cost and dates.
FL07SA-152 — XL Roll Flange 1040×1000 mm, No-Plug 6" No Flaps
FL07SA-152 — XL Roll Flange 1040×1000 mm, No-Plug 6" No Flaps is backordered and will ship as soon as it is back in stock.
The problem
Large rolls — paper master reels, jumbo film, textile bobbins over 800 mm diameter — can't go on standard flanges. The XL category has fewer options and higher stakes: one fallen roll costs thousands.
The XL flange system needs to support up to 1 ton suspended, allow pallet stacking above, and survive forklift handling cycle after cycle.
What FL-07SA-152 is
FL-07SA-152 — XL plastic flange 1040×1000 mm. No plug 6" hole, without flaps. Most streamlined XL variant.
Largest flange for rolls up to 1000 mm diameter, designed for suspended storage without ground contact. Features side tabs for 1+1 stacking and a 6-inch plug hole. Made from recycled material, it combines high strength, reusability and efficient stackability.
Dimensions: 1040×1000×60 mm. Weight per unit: 15.2 kg. Material: PP.
Why it works
Suspended roll storage. Lifts rolls off the warehouse floor — protects edges, frees floor space, enables vertical stacking with pallets above.
Heavy-load support. Engineered for industrial roll weights.
Multi-cycle recycled plastic. Reusable across dozens of cycles. Recyclable in standard polyolefin streams. Replaces wooden flanges and the dust they generate.
Where it fits
FL-07SA-152 is built for:
- Roll producers shipping packaged film, foil, paper — suspended storage and stacked transport
- Aluminium and metal coil converters — protection of delicate edge layers
- Pharma and food roll packaging — clean alternative to wooden flanges
- Textile roll operations — multi-roll horizontal packaging held together by flanges
This is a variant of the FL-07S-152 base model in the same family.
Technical specifications
| Specification | Value |
|---|---|
| Code | FL-07SA-152 |
| Footprint | 1040×1000×60 |
| Weight per unit | 15.2 kg |
| Material | PP |
| Color | Black |
| Maximum roll diameter | 1000 mm |
| Minimum roll diameter | 160 mm |
| Maximum number of rolls | 1 |
| Application | Customer shipping |
| Minimum order quantity | 30 |
| Country of origin | Italy |
| HS code | 3923.90.00 |
Frequently asked questions
Q: How are FL-07SA-152 flanges installed on a roll?
A: Flanges are pressed onto the core ends, supported by a plug (when included). The flange pair holds the roll suspended off the floor for stacking and storage.
Q: Are flanges reusable?
A: Yes. Plastic flanges are designed for multi-cycle service — typically dozens of cycles in standard handling conditions, much longer than wooden alternatives.
About the ROLL FLANGE series
ROLL FLANGE is the range of plastic solutions designed to package and protect rolls using side flanges. Their purpose is to protect roll edges, enable stacking and keep rolls suspended in horizontal position without contact damage. Highly reusable and durable, they represent the ideal alternative to wooden flanges, improving hygiene, safety and material protection throughout storage and transport.
Technical specification
Dimensions
Key specifications
| Lead time | Made to order — typically 15–17 working days |
| Max roll diameter | Over 600 mm |
| Max roll weight | 1250 kg |
| Type of storage | floor or shelves |
| Destination | customer shipping |
| Pieces per pack | 30 |
| Minimum order quantity | 30 |
Lead time to dispatch (ex-works). Transit time not included — groupage delivery may add several working days.
PPWR & compliance — Reg. (EU) 2025/40
| Reusable | Reusable (multi-cycle) |
| Primary material | Plastic |
| Material origin | Recycled standard |
| Recyclable | 5 - PP |
| Substances | No SVHC ≥ 0.1% w/w · heavy metals < 100 ppm |
| PPWR scope | Industrial packaging |
ROLL declares compliance with the applicable requirements of Reg. (EU) 2025/40, as downstream user under REACH, on the basis of supplier documentation and EN 13427–13432.
Applications
Technical FAQ
Compare with related solutions
Side-by-side specs of this product and its closest alternatives in the ROLL range.
| Facet | |||
|---|---|---|---|
| Max diameter | |||
| Max diameter | |||
| Max load weight (kg) | |||
| Max load weight (kg) | |||
| Rack-compatible | |||
| Rack-compatible | |||
| Food contact | |||
| Food contact | - | - | - |
| Price | |||
| Price |
Regular price
€19,40
Unit price
|
Regular price
€29,70
Unit price
|
Regular price
€3,40
Unit price
|
Technical specification
Dimensions
Key specifications
| Lead time | Made to order — typically 15–17 working days |
| Max roll diameter | Over 600 mm |
| Max roll weight | 1250 kg |
| Type of storage | floor or shelves |
| Destination | customer shipping |
| Pieces per pack | 30 |
| Minimum order quantity | 30 |
Lead time to dispatch (ex-works). Transit time not included — groupage delivery may add several working days.
PPWR & compliance — Reg. (EU) 2025/40
| Reusable | Reusable (multi-cycle) |
| Primary material | Plastic |
| Material origin | Recycled standard |
| Recyclable | 5 - PP |
| Substances | No SVHC ≥ 0.1% w/w · heavy metals < 100 ppm |
| PPWR scope | Industrial packaging |
ROLL declares compliance with the applicable requirements of Reg. (EU) 2025/40, as downstream user under REACH, on the basis of supplier documentation and EN 13427–13432.
Applications
Technical FAQ
ROLL best sellers
A selection of ROLL solutions for the most common roll storage and shipping needs.
CV01b Roll Converto — Pallet Transformer for Rolls
€62,00
KU10 — Plastic Roll Wedge, Patented Nail-Free Fixation
€1,19
LO01 — Roll Pallet for Floor Handling, 1 to 3 Rolls
€124,00
RCV69 — Best-Priced Roll Pallet for Rack Storage
€96,00
PC02-400B — Cardboard Base Cradle for 2 Rolls Ø 380-400 mm
€3,50
FL06-152 — Heavy-Duty Roll Flange 840×800 mm with 6" Plug
€19,40
