Roll cradles: molded pulp, foam, cardboard or plastic?
A roll cradle is a shaped support with half-round seats that keeps rolls apart and stops them from rolling on a pallet. Four materials are in common use: molded pulp, foam, cardboard and plastic. The first three are mainly single-use cradles that travel with the shipment. Plastic cradles are reusable: choose them when the cradle comes back.
How do the four materials compare?
| Criterion | Molded pulp | Foam | Cardboard | Plastic |
|---|---|---|---|---|
| What it is | Paper fibre, usually recycled, pressed in a mould | Expanded foam, usually EPS, moulded with seats | Cardboard support with one seat per roll | Rigid plastic cradle, often built into a pallet |
| Typical use | One-way shipments, rolls stacked in layers | One-way shipments, rolls stacked in layers | One-way shipments, rolls stacked in layers | Storage, moves inside the plant, loops where the pallet returns |
| Reuse | Generally single-use | Generally single-use | Generally single-use | Made for repeated use |
| Moisture | Absorbs water: keep dry | Does not absorb water | Absorbs water: keep dry | Does not absorb water and can be washed |
| After use | Paper and cardboard recycling, where available | Depends on local foam collection | Paper and cardboard recycling, where available | Stays in service; plastic recycling at the end of its life, where available |
The table describes each material in general terms. Always check the data of the specific product.
When is a single-use roll cradle the right choice?
When the rolls leave on a one-way shipment and the cradle will not come back. The cradle is then part of the packaging: it travels with the rolls and the receiver recycles or disposes of it following local rules. Molded pulp, foam and cardboard all do this job. The choice depends on roll diameter, roll weight, moisture on the route and the waste streams available to the receiver.
When is a reusable plastic roll cradle the right choice?
When rolls move inside the plant, wait in storage or travel in a loop where the pallet returns. The cradle is then equipment, not packaging. In a roll cradle pallet the cradle is part of the pallet, so there are no loose parts to collect and send back. Where the area has to be kept clean, plastic can be washed.
Which roll cradles does ROLL supply?
ROLL designs and supplies two of the four types. Molded pulp and foam cradles are described on this page for comparison only.
- Cardboard roll cradles: base and interlayer models for 2 to 6 rolls per layer, for roll diameters from Ø 160 to 580 mm, plus the adjustable PCU-80 stacker for Ø 150 to 350 mm.
- Reusable plastic roll cradle pallets: models for rolls from Ø 160 to 1600 mm. For example, the LO01 and LO02 carry 1 to 3 rolls with a published maximum load of 1800 kg, and the LO02 is published as rack-compatible up to 1800 kg.
The values are those published on the collection and product pages.
Frequently asked questions
Are molded pulp and cardboard roll cradles recyclable?
Both are made of paper fibre, so after use they generally go into paper and cardboard recycling where it is available, following local rules.
What is the difference between a roll cradle and a roll cradle pallet?
A roll cradle is a separate support placed on a pallet or between two layers of rolls. A roll cradle pallet has the cradle built into the pallet, so pallet and cradle are one unit.
Which roll cradle can be used on racks?
Rack storage depends on the pallet under the rolls, not only on the cradle. Among the ROLL models, the LO02 roll cradle pallet is published as rack-compatible up to 1800 kg.
Related guides: cradle, wedge or flange, pallet with wedges, pallet topper or roll cradle pallet.
Tell us your roll diameter, width and weight, and whether the cradle comes back: request a quote.